Changing to Flouresence
1. Go to "Detectors" and then "current" to get a list of the currently used
2. Go to "Detectors" and then "File" gives a list of possible file detectors can be used
3. Trans.DET for transmission and GE30SCA1.DET is germanium with one scalar; GE30 SCA2.DET is a germanium detector with two scalars (we're using sca1)
4. Then you turn the beam OFF and do offsets by going to "Detectors"/"Current"/"Offsets"
5. Then run GE30 form command prompt, or restore from background
6. So this application is used to select what energy range you want to make counts (you are setting a window)
7.
2. Go to "Detectors" and then "File" gives a list of possible file detectors can be used
3. Trans.DET for transmission and GE30SCA1.DET is germanium with one scalar; GE30 SCA2.DET is a germanium detector with two scalars (we're using sca1)
4. Then you turn the beam OFF and do offsets by going to "Detectors"/"Current"/"Offsets"
5. Then run GE30 form command prompt, or restore from background
6. So this application is used to select what energy range you want to make counts (you are setting a window)
7.
posted by Jesse at 11:49 AM
0 Comments:
Post a Comment
<< Home